NIPUER-24 WITH AUTOMATIC FEED

Laterally open structure with useful working area of 2850 mm. length and 1150 mm wide with the following configurable on-demand equipment: Composition of the head as a function of customer needs. Different head configurations multigroup drilling both vertically and horizontally. Head with fixed groups direct attack tool by means of clamps or milling group with tool changer of 8 position of tool attack through cones ISO-50 or HSK FR 63. Spindles powers 2 - 5.5 - 7.5 to 12.5 kW. Horizontal milling groups direct or forwards. Saw group programmable from 0 to 90 degrees without forwarding. Anti-chips system for machining the bolts and hinges. Approximation meters (probes) in the horizontal groups. Pneumatic copiers in vertical milling groups. Pneumatic copiers in the saw from 0 to 90 degrees. Laser mapping system to position the pieces with marquetry over the table. Automatic detection system of inclination of the veneers to align the sparrow peak millings to the inclinations. Stuck system at the slotted bottom through termoadhesive tape. Automatic positioning of the beds as a function of the width set. Working tables: Automatic door feeding system. Collection and removal system of remnants of great dimension. Chip collection system through lower conveyor. Mobiles with subjection system by independent suction cups. Parameterized programming. System programming and cad-cam adapted to the application requested. Program loading through bar-code reader. Job execution listings through automated programs with loading and unloading. Telecare and breakdowns diagnostic via Internet.